2011-2017 Mustang Drop-In Kits

Kits Include (Pump Module, Gauge, Regulator, Filter)

Single 450: 18036, 15633, 13303, 12350

Dual 450: 18037, 15633, 13134, 12341

Triple 450: 18038, 15633, 13134, 12341

Dual 340: 18039, 15633, 13303, 12350

1. Direct drop in unit to OEM tank with no drilling or fabrication required.
2. System allows for the use of both OEM sending units ( one located in each side
of tank). Bracket provided on pump assembly to accept OEM sending unit. (Must
install quick disconnect electrical connectors on OEM sending unit wires). Siphon
pickup side of tank (driver’s side) is not disturbed. Outlet cap has a set of
terminals that must be connected to OEM sending unit wires.
3. Uses patented Aeromotive jet siphon in conjunction with OEM jet siphon
pickup. All internal tank hoses are retained. Internal jet siphon hose with quick
connect attaches directly to Aeromotive jet siphon. Aeromotive siphon used to
transfer fuel at a higher flow rate to pump side of tank.
4. Outlet cap uses -08 ORB outlet ports for Main Outlet port, Auxiliary Port, and
Return port.
5. System retains all OEM tank venting.
6. System variations offered: Single 450, Dual 450, Triple 450, and Dual 340.
Horsepower range (forced induction/fuel injected/pump gas) 700 fwhp – 2,300
fwhp.
7. Two sets of pump terminals in Outlet Cap, one set to control Main pump,
second set to control a second pump /second and third pumps together.

This product is not legal for sale or use on emission-controlled vehicles except when used on a dedicated race vehicle.

ECUMASTER Plug and Play adapter for the Audi 2.2 AAN / 3B / ABY allows for plug and play installation of EMU Black standalone ECU. All ECUs are sold separately.

ECUMASTER Plug and Play adapter for the Audi 2.2 AAN / 3B / ABY allows for plug and play installation of EMU or EMU Classic standalone ECUs. All ECUs are sold separately.

ECUMASTER Plug and Play adapter for the Audi B5 S4 / RS4 allows for plug and play installation of EMU Black standalone ECU. All ECUs are sold separately.
The Audi B5 S4 / RS4 adapter was developed on vehicles with the AGB and ASJ engine code. Customers have found other engine codes to be the same configuration. Please check the ECU pinout diagram your engine code to verify it matches the AGB/ASJ pinout before purchasing.  

ECUMASTER Plug and Play adapter for the Audi B5 S4 / RS4 allows for plug and play installation of the EMU or EMU CLASSIC standalone ECUs. All ECUs are sold separately.
The Audi B5 S4 / RS4 adapter was developed on vehicles with the AGB and ASJ engine code. Customers have found other engine codes to be the same configuration. Please check the ECU pinout diagram your engine code to verify it matches the AGB/ASJ pinout before purchasing.  

One back shell cover for PMU 16. This connector clips onto the back of 39 pin connector and has provisions for a zip tie to pass through. 

NOTE: 39 pin connector is not included

Don't let that phone die with this 2600 mAH battery bank and phone charger with ECUMaster logo. Color selected at random, will be White or Yellow.

To use, simply charge through the micro USB port until the charge indicator changes color. To charge your phone or accessory, plug your charge cable into the USB port.

BATTERY ISOLATOR

BATTERY ISOLATOR

The CAN Bus Bluetooth Adapter for the ECUMaster EMU Black allows for wireless display of ECU parameters on an Android tablet or phone. This adapter is for use with the CAN version of the EMU (6 pins on the expansion port as opposed to 5 pins on the normal EMU), or with a standard EMU with the CAN expansion module or with the EMU Black. If you have an EMU Classic with the 5 pin expansion port, purchase the serial Bluetooth adapter instead. The Android app allows the customer to customize the style and size of the gauges, as well as deciding which parameters to display. Gone are the days of clumsy gauge pillars and dashboards littered with gauges, as all critical information can be displayed on one device quickly and easily. At $99, the Bluetooth adapter is an incredible value, especially when compared to buying gauges or a racing dash display.

 DOCUMENTS:

CAN BT WIRING INSTRUCTIONS/EMU BLACK SETUP

EMU CAN BT MANUAL

The Bluetooth Adapter for the ECUMaster EMU allows for wireless display of ECU parameters on an Android tablet or phone. The Android app allows the customer to customize the style and size of the gauges, as well as deciding which parameters to display. Gone are the days of clumsy gauge pillars and dashboards littered with gauges, as all critical information can be displayed on one device quickly and easily. The Bluetooth adapter plugs directly into the auxiliary port on the EMU and can be installed in a matter of seconds. At $99, the Bluetooth adapter is an incredible value, especially when compared to buying gauges or a racing dash display.

User Manual located HERE. 

The BTI CAN gauge is an elegant solution for viewing real-time data from the ECUMaster EMU. The BTI gauge is directly compatible with the CAN version of the EMU (6 pins on the extension port) and can be used with the serial version of the EMU (5 pins on the extension port) when you add the ECUMaster CAN expansion module.
The gauge features 12 programmable screens that are capable of displaying more than 25 parameters, sensor functionality, EGT, and knock warning. Not only do you have the ability to see many parameters on one gauge, but this means that you do not have to purchase and wire in several additional sensors.

Downloads:

BTI GAUGE INSTALLATION GUIDE FOR EMU

CAN Switch Board is tiny device that allows for the transfer of up to 8 switch states and 8 analog signals over the CAN bus. In addition, the device has two built-in LED outputs that can be activated with CAN bus messages to display ECU modes or warnings. The main purpose of this board is for custom steering wheel applications containing buttons, rotary switches and indicators, but applications are limitless. With this module, OEM steering wheel buttons or custom keypads can be used. This board is for use with the EMU Black or PMU16.

Key features of the V3 board

CAN BUS 2.0B, 500 or 1000kbs, user selectable,
different CAN ID and CAN frame structures can be selected,
only 25x25mm (1 inch square) in size,
8 low-side switch button inputs,
8 analog inputs (for sensors, rotary switch inputs, 0-5V, 10bits
4 low-side outputs for LEDs
6-20V power supply
5V output for powering rotary switches or potentiometers


USER MANUAL LOCATED HERE. 

Connector kit for the ADU 7, ADU 5, and ADU 5 IP65. Includes one 35 position connector and 35 terminals.

Dual H-Bridge Connector Kit. One gray connector housing with 18 high current small terminals and 6 high current large terminals.

EMU Connector Kit. One set of gray and black connector housings with 48 terminals for the ECUMaster EMU

EMU Black Connector Kit. One set of gray and black connector housings with 63 terminals for the ECUMaster EMU Black (picture not accurate, this item includes a black 39 pin connector and gray 24 pin connector and full set of terminals)

PMU Connector Kit. One black connector housing with 20 standard terminals and 14 high current terminals for the PMU16 and PMU16-DL. 

WHPWB423 is a connector, terminals, and wire seals for a Bosch 4.2 Wideband Oxygen Sensor. A 4.2 sensor may be used with both the EMU Classic and EMU Black